My buddy Rick sent me an e-mail describing how
he trimmed his bougainvillea using his Pinzgauer.
I used Archie to trim my bougainvillea, but it just
ripped the whole thing out of the ground!
Here's Archie's video
Here's Rick's inpirational e-mail!
1. Attached choker strap to base of bougainvillea
2. Attach steel cable to strap
3. Attach the other end of steel cable to Pinzgauer bumper pin
1. Place gear shift into reverse (low range)
2. Release clutch
Bougainvillea will no longer need trimming. This procedure takes
one minute and one beer.
[Home] - [Site Map] - [Donate] - [Car Shows] - [Multimedia] - [Photos] - [Links] - [Contact]
Copyright© 2003 StillRuns.com